1 Information about the stickers
1.1 How do i put the stickers on
Paste Instruction:
Keep the stickers least one days before you paste from the tube, roll out the sticker rub well with a squeegee or such a bank / customer card. The space where you'll paste should not be too cold.
Labels no longer than necessary in the duct are not immediately stick to get him out of the box and lay it flat. First, the surface where you want to paste the stickers to be smooth. Window or door: cleaning and degreasing, such as glass cleaner or any cleaner. The surface must be dry to start. If the surface is painted, it must be properly cured. Walls should be smooth and preferably painted with (washable) with latex orsmooth wallpaper. A wall is uneven or painted with lime based paint is generally not suited to laminating. A label consists of 3 layers: the medium of paper (here is the brand of the foil), the sticker itself and the application tape (paper or thin transparent layer over the sticker).
- Rub the sticker well with the application tape with a squeegee or a bank / customer card. The better you aanwrijft sticker, the easier it will loslagen of the back. Attach the sticker to the surface with pieces of wallpaper on the top step. Measuring possibly after pasting to right. Measure from the sticker and not from the paper form! The craft is never quite the right label myself!
- Smaller stickers pasted not exactly right you also have to be the first carrier to remove the surface and then paste. Put the sticker on the front of the table and slowly pull the paper medium separately. Small pieces can go, push it through the paper on the application tape.
- Now a piece of adhesive tape over the top painting of the design. Paste about half of the tape on the application paper and half on the surface. Rub well again now.
- Save up and get off the back of the design. Do this carefully so that the draft paper stuck on the application. Otherwise again rub.
- Keep the string tight and application tape from the center up and down the sticker on the sticker in the background. Well rub and watch for any air bubbles under the sticker. Air under the application tape disappears after removing the tape.
- Pull the paper tight application, flat and quiet road. If the sticker is released, the whole bit longer sit still. Small bubbles will disappear by themselves, larger bubbles can be easily removed with a pin. Jab in the center and rub out to the sides of the hole.
We are in no way liable for damage before, during or after the application of the stickers.
TIP! IN A BIG STICKER MAKE SURE YOU GO WORK FOR 2 PERSONS!
1.2 Are the stickers easy to work with?
The paste is very easy and every order is a clear instruction included. Would you remove the stickers again? That is easy. Most of the surfaces so they can pick from. If not then you can also heat the stickers with a (paint) hairdryer and then remove.
1.3 Where can the stickers all be stuck on?
The stickers can be stuck on all smooth surfaces such as glass, plexiglass, Cars, metal, plastic, tiles, doors, windows etc. In most cases, even the stickers are pasted on walls who painted with latex. The smoother the wall the better it is. Wallpaper is also a suitable substrate if the wallpaper is smooth. The stickers can not be reused worders. Hemma, väggcitat och mer can not be held responsible if an injury occurs before, during or after the confirmation of the text.
1.4 Where are the stickers made of?
The stickers are made of vinyl.
This is the same material as used on trucks, construction signs, etc.
An average of 5-7 years into the vinyl.
1.5 I would like to make a sticker with a different size. Is this possible?
This is in most cases possible.
Send us by email all the information and we make you an offer.
1.6 Liability?
Hemma, väggcitat och mer is in no way liable for damage before, during or after the application of the stickers
